850nm Multi-Mode Electrical VOA for Optical Signal Control

• Customization: Available
• Type: Fiber Optic Attenuator
• Wiring Devices: DDF
• Model NO.: MM EVOA
• Certification: ISO, RoHS
• Condition: New
• Transport Package: Carton
• Trademark: Own Brand(Ziguan
• Origin: China

Product Description

ZG 850nm MEMS VOA: The Ultimate Solution for Optical Power Management
 
ZG 850nm MEMS VOA is a groundbreaking miniature variable attenuator designed for the C and L bands. Get ready to experience unparalleled performance and take your optical power management to new heights!

With its exceptional wavelength dependence and ripple, low polarization dependent loss (PDL), and improved thermal stability, this attenuator is a game-changer. Say goodbye to power fluctuations and achieve precise optical signal control.

Equipped with an advanced graded neutral density filter as its attenuating element, this attenuator guarantees top-notch performance. And adjusting the attenuation is a piece of cake with the stepper motor and feedback control terminal. Enjoy fine resolution and seamless operation like never before. And The reflective optics allow for same-side jumper exit and effortless panel mounting, making installation a breeze.

Worried about losing your settings? Don't be! Our attenuator comes with a standard latching operation feature that retains your most recent attenuation setting even when the drive voltage is removed. Plus, we offer an optional resistance readout for easy filter location purposes.



Figure 1 Functional Scheme

1.2 Product Application
<Structural/application scheme, chart or description>
1.3 Related Product List

OPTIC AND/OR ELECTRIC SPECIFICATION
Optical Specifications

NO.	PARAMETER	SPECIFICATION			UNITS	NOTE
		MIN.	TYP.	MAX.
2.1.1	Wavelength range	800-1100			nm
2.1.2	Attenuation range	30			dB
2.1.3	Respo nse speed @3dB Adjus t Attenuation resolution			100	ms	Driven in voltage mode
2.1.4	Attenuation resolution			0.2	dB	Full Step
2.1.5	Latching stability			0.3	dB	Based on motor power ON to OFF
2.1.6	Insertion loss			1.0	dB	With connector, over wavelength rang.
2.1·.7	Attenuation line linearity			5	%	30db@±0.5db
2.1.7	Repeatability			0.1	dB	Difference in attenuation on return to a particular attenuation from a random location approaching from the same direction. Note: Attenuation value at a specific voltage/step may vary with age and will vary from unit to unit
2.1.8	Backlash			0.2	dB	Difference in attenuation on return to a particular position from a random location. Note: Attenuation value at a specific voltage/step may vary with age and will vary among units
2.1.9	Return loss @Input/output	-25			dB	With connector
2.1.10	PDL @In/Out			0.5	dB	Measured from IN to OUT ports over wavelength range @ whole adjust attenuation range
2.1.11	TDL @In/Out			0.5	dB	Measured from IN to OUT ports @ whole adjust attenuation range
2.1.12	PMD@In/Out			0.15	ps
2.1.13	Power Handling			300	mW	CW

 

NO.	PARAMETER	SPECIFICATION			UNITS	NOTE
		MIN.	TYP.	MAX.
2.2.1	Motor Type	Step Motor,2 Phase
2.2.2	Motor Current		150	200	mA	2 phase on
2.2.3	Recommended DC Control Voltage	3.0	3.3	3.6	V	Full stepping and both coils are energized
2.2.4	Pulse width per step	1.25	2.0		ms
2.2.5	Motor Resistance		20
2.2.6	Motor Power Dissipation			2	W	Over -5~70ºC temperature range

ABSOLUTE MAXIMUM RATINGS

NO	PARAMETER	SPECIFICATION	UNITS
3.1	Operation Temperature	-5 ~ +70	°C
3.2	Operation Humidity	5 ~ 95	%RH
3.3	Storage Temperature	-40 ~ 85	°C
3.4	Reliability	Accord with the Telcordia GR-910,GR-1209 and GR-1221 requirement.		1

Note1:
1. Shall pass MIL-STD883(500V) ESD test.
2. Shall pass Fiber Side Pull and Fiber & Cable retention test according to GR-1209-Core.

ELECTRIC PORTS DEFINITION

NO	PIN	DEFINITION	DESCRIPTION	NOTE
5.1	1	Motor Coil A-
5.2	2	Motor Coil B
5.3	3	Motor Coil B-
5.4	4	Motor Coil A
5.5	5	Monitor Signal	POT WIPER, Moveable POT contact: voltage pick-off.
5.6	6	Monitor Supply+	POT+, Connect to stabilized (reference) positive supply
5.7	7	Monitor Supply -	POT-, Connect to ground
5.8	8	Case ground
5.9	9	NA
5.10	10	NA
5.11	11	NA
5.12	12	NA

MECHANICAL DRAWINGS



7 PIGTAIL AND CONNECT

NO	PARAMETER	SPECIFICATION	UNIT	NOTE
8.1	Pigtail Type(All ports)	62.5/125um or50/125um Multimode fiber		As customer's requires
8.2	Pigtail Length(All ports)	L+/- 0.1	m	L refers to the fiber length requirement in PN
8.3	Connector Type(All ports)	As customer's requires

 

 

FAQ

Q1: Can I have a sample order? What is your MOQ?

A1: Any buyer is welcomed to place sample order to test the quality. No MOQ, 1pcs sample is available.

Q2: What's the lead time?
A2: The normal lead time is about 1 week, for big quantity and special products. Please check lead time with our sales representative. 

Q3: What are the payment terms?
A3: Payment term: T/T, Paypal, Western union,Cash payment, etc.

Q4: What is your warranty time?
A4: 1 years warranty.

Q5: Could I use our own logo, label and package?
A5: Yes, we could provide OEM service which according to your requirements, design products label, logo, PN, SN, package.